Craft

From Marble Block to Table Top: How Our Inlay Tables Are Made

From Marble Block to Table Top: How Our Inlay Tables Are Made – Heritage Marble Crafts

Every inlay table top we ship starts as a plain slab of marble. Over the following weeks it is cut, carved, inlaid and polished by hand. Here is what happens at each stage.

1. Selecting the slab

We choose marble for colour, density and the absence of cracks. White marble should be evenly toned; black marble should take a deep, even polish. The slab is cut to your size and the edges are shaped – round, oval, square, rectangular or octagonal.

2. Drawing the design

Our designers draw the pattern at full scale. For custom orders this is the stage where we send you a drawing for approval, so you can adjust colours, density or motifs before any stone is cut.

3. Carving the cavities

The artisan cuts recesses into the marble along every line of the design. This is slow, careful work: the depth must be consistent so that every stone sits at the same level.

4. Cutting the stones

Semi-precious stones arrive as small slabs. Each petal, leaf and border piece is cut and ground by hand on a rotating wheel, checked against its cavity, and refined until it fits without a gap.

5. Setting and curing

The stones are set one by one. Once the whole design is in place, the top rests so the adhesive can cure fully.

6. Grinding and polishing

The surface is ground level and then polished with progressively finer abrasives. This stage brings out the colour of each stone and gives the marble its soft glow.

7. Final checks and photos

Before packing, we inspect the piece under good light and send you photos and a short video. Only after you are happy does it go into its crate.

Stage What you see
Design approval A drawing of your top, with stone colours
Crafting Progress photos on request
Before shipping Final photos and video
In transit Tracking number

Making times depend on size and design density. Ask us for an estimate for your piece – we will give you an honest timeline before you order.

Planning a custom piece?

Share your size, stone and design idea – we reply with a sketch and a quote within 24 hours.

Request a custom quote